Designed for MacBook Pro and MacBook Air


Specially designed for the Macbook Pro (2018/2020) and MacBook Air (2018/2020), this CN-411 Dual USB-C Multiport Pro Adapter turns the 2 USB-C ports on your Macbook into 7 multifunctional ports and 2 card reader slots and powers it at the same time. The CN-411 Dual USB-C Multiport Pro Adapter is also compatible with MacMini (2018/2020).


With the 4K 60Hz HDMI port and 4K 30Hz HDMI port, you can enjoy crystal clear 4K HDMI Ultra HD extended across two HDMI monitors in dual setup. Use the RJ45 port to connect to a wired Gigabit network. The USB 3.1 Type-C and Type-A ports support 5Gbps data transfer speeds and 4.5W power. You can read and write SD and MicroSD Cards with the integrated card reader slots. You can do all that while you are powering your MacBook with the 100W USB-C Power Delivery port.


The aluminum housing of the CN-411 Dual USB-C Multiport Pro Adapter matches your MacBook perfectly. The adapter is fully Plug & Play, which means that no additional driver software is required so you can be up and running quickly.



  • 2 x USB 3.1 Type-C input
  • HDMI 2.0 output with resolutions up to 3840x2160@60Hz
  • HDMI 1.4 output with resolutions up to 3840x2160@30Hz
  • 10/100/1000Mbps auto-detection Gigabit LAN
  • 2 x USB 3.1 Type-A Output (5Gbps data and 4.5W power)
  • 1 x USB 3.1 Type-C Output (5Gbps data and 4.5W power)
  • Supports USB SuperSpeed 5Gbps, downwards compatible with USB 3.0 / 2.0
  • SD and MicroSD Card Reader
  • Supports Secure Digitalv1.0/v1.1/v2.0/SDHC/SDXC up to 2TB
  • Supports Secure Digital v3.01 UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104)
  • Supports MultiMediaCard (MMC) v3.x/v4.0/v4.1/ 4.2
  • 100W USB-C Power Delivery (20V / 5A)
  • Plug & Play, no driver software required



  • USB 3.1 Type-C Male × 2
  • HDMI Female x 1 (HDMI 2.0)
  • HDMI Female x 1 (HDMI 1.4)
  • RJ45 Ethernet Port x 1
  • USB 3.1 Type-A Female x 2
  • USB 3.1 Type-C Female x 1
  • USB 3.1 Type-C PD Female x 1
  • SD / Micro SD Card Reader slots



  • Compatible with MacBook Pro (2018/2020) / MacBook Air (2018/2020) / MacMini (2018/2020)



  • Dual USB-C Multiport Pro Adapter with USB-C Power Delivery



  • MacBook Pro (2018/2020) / MacBook Air (2018/2020) / MacMini (2018/2020)
  • 2 free USB-C ports
  • USB Power Delivery Charger (with cable)


Does not support MacBook models with single USB-C port. Also works with Mac mini (2018/2020). Requires direct HDMI to HDMI connections and does not support SuperDrive. Please note that Your MacBook’s USB-C ports standard power supply is 5V / 1.5A. When the total current required by connected devices exceeds 1.5A, please connect an external USB Power Delivery Charger to the USB-C PD port before plugging in these devices with higher current requirements.





© 2023 by Sitecom B.V. All rights reserved  -  Privacy policy